Lightweight

CLIMBING HARNESS | ADJUSTABLE LEG LOOPS

New, fully adjustable harness with four buckles, ideal for mountaineering, winter climbing, and Via Ferrata.

SPORT CLIMBING HARNESS | FIXED LEG LOOPS

New sport climbing harness with fixed leg loops, offering maximum comfort, low weight, and excellent freedom of movement.

- Lightweight and comfortable backpack for carrying personal equipment.
- It can be fixed inside the bag OMNI BAG through dedicated attachment points.
- Opening with 270° double slider zip.
- Inside the backpack, there are 3 large textile loops and one small textile loop that allow the organized positioning of the equipment.

LINUS

The harness is designed for adventure circuits at height. A functional design where its lightness, resistance in friction areas, and an easy adjustment system using buckles are notable.

One size with a wide range:

• Adjustable waist of up to 120 cm.
• Adjustable leg straps of up to 90 cm.
• Elastic straps at the back.

BASKET STRETCHER FOR TERRESTRIAL SCENARIOS

Extremely lightweight shell stretcher that can be disassembled into two parts for easy transport, equipped with internal padding and fastening straps.

BASKET STRETCHER WITH LIGHTENED SHELL

The basket stretcher is fitted with a shell that has hexagonal holes that allow water and sand to drain out.
Extremely lightweight, it can be disassembled into two parts for easy transport. Equipped with internal padding and fastening straps.

CARBON FIBER SPINAL BOARD | FOLDABLE IN 2 PARTS The new version is in shiny carbon fiber with a rough finish on the upper part to improve the grip.

Revolutionary foldable spinal board entirely made of carbon fiber. Ready to use in a few seconds by sliding the lateral “stiffening” bars (already assembled).

Safety Helmet with New Adjustment System: Advanced Safety and Optimal Comfort

Features:

• New rear adjustment system with dial: for exceptional comfort and complete contact with the nape of the neck.
• Lightweight, comfortable, and well-ventilated: ideal for prolonged use.

Common features of the X-Five models:

• Full body work harness with 5 attachment points.
• Designed for rope access suspension (via ventral attachment point), positioning (via lateral or ventral attachment points), restraint, and fall arrest (via sternal or dorsal attachment points).

INNER CLOTH FOR ROPE PROTECTION | COMFORTABLE SHOULDER STRAPS

Rope bag, comfortable and lightweight, specifically conceived for use in climbing.
Inner cloth to be grounded to protect the rope, with 4 slots for fixing.
Wide opening for easy repositioning of the rope.
Rapid clip and drawstring closure, wide external pocket with zip closure.

The work and positioning harness is extremely light and comfortable.

• Equipped with three anchor points (ventral, sternal, and dorsal) and two lateral positioning rings in light alloy, which can be locked in the closed position to prevent accidental entanglement.

  ALUMINUM PULLEY | SINGLE WHEEL

Compact and lightweight pulley with fixed side plates, aluminum body, and ball bearing to ensure optimum efficiency.
Nylon wheel.
For ropes up to 11 mm in diameter.

ALUMINUM PULLEY Low friction pulley fitted with a locking device that can be engaged and disengaged through the special pawl.
Compact and lightweight, conceived for mountaineering and rescue.
Properly used in recovery, it becomes fundamental for the preparation of simple or double hoists in rescue and self-rescue.

Evolution of the well-known Indy Evo descender, fitted with a new lever, easier to handle, that allows more fluid and precise working.

Indy Evo Plus is a manually operated descender device with a double autolocking system, that locks both when the lever is released or when it is pressed.

  DYNEEMA | ANCHORING SLING

Dyneema sling. Lighter and softer than polyamide rings.
Available in various sizes, from 30 to 180 cm in length (60 to 360 cm in circumference).
Excellent abrasion resistance.
Very useful for creating anchor or positioning points.

Light alloy carabiner with a wide opening. The particular D shape prevents the rotation of the carabiner and allows for the distribution of the load along the major axis.
Equipped with a Keylock system that prevents any snagging on the rope and in the bolts.

Light alloy carabiner with straight gate and wide opening. The particular D shape prevents the rotation of the carabiner and allows for the distribution of the load along the major axis.
Equipped with a Keylock system that prevents any snagging on the rope and in the bolts.

Light alloy carabiner with straight gate and wide opening. The particular D shape prevents the rotation of the carabiner and allows for the distribution of the load along the major axis.
Equipped with a Keylock system that prevents any snagging on the rope and in the bolts.

Aluminum connector with 2 actions Twist Lock sleeve and Keylock system. The classic wide pear shape makes it suitable for belaying with a clove hitch. Can be used with all anchoring and belaying systems. The automatic sleeve makes it suitable for professional use.

Aluminum connector with screw sleeve and Keylock system. The classic wide pear shape makes it suitable for belaying with a clove hitch. Can be used with all anchoring and belaying systems. The screw sleeve makes it suitable for professional use.

Aluminum connector with 3 actions Auto Block sleeve and Keylock system. The classic wide pear shape makes it suitable for belaying with a clove hitch. Can be used with all anchoring and belaying systems. The automatic sleeve makes it suitable for professional use.

Aluminum carabiner light and high load, with screw sleeve and Keylock system. The D shape transfers most of the load on the main axis of the carabiner, which is the most resistant. The asymmetric shape is also ideal for belay systems.

Compact and lightweight carabiner, with a high tensile strength.
The particular shape makes it suitable to be handled more easily by people with small hands, like women or children.